Fasteners
Bolt Solid Plate Fastener
 Flexco® Bolt Solid Plate fasteners are engineered to meet the demands
of the toughest material handling applications, providing a strong sift-free
splice and superior holding ability. A choice of sizes accommodates belts
from3/16" (5 mm) to over 15/16" (24 mm) thick.
High strength
High strength is the result of superior design and plate compression on
both the top and bottom sides of the belt. High tensile strength bolts
compress top and bottom plates to distribute splice tension evenly across
the entire width of each fastener plate. For added strength and pull-out
resistance, specially formed teeth penetrate deep into the belt carcass – without
damaging carcass fibers.
Easy installation
Field-proven templets, punches, and boring tools make it easy to quickly
and accurately prepare belts for fastener installation.
Fasteners are easily installed on-site using portable hand tools or power
tools. Our exclusive piloted bolts also contribute to faster installation.
Market applications
- Sand
- Gravel
- Crushed stone
- Grain
- Coal
- Cement
- Salt
Bolt Hinged Fastener
 Sturdy hinged construction makes Flexco® Bolt Hinged fasteners ideal
for applications that use smaller pulleys, but still require a high-strength,
dependable splice. A choice of sizes accommodate belts from 1/4" (6
mm) to 5/8" (16 mm) thick.
Versatile, easy-to-install design For belt conveyor applications
subject to frequent length adjustments, the Bolt Hinged
fastener is easy to install – and re-install. The joint
can be separated simply by removing the hinge pin.
On-site installation requires hand or power tools. Our exclusive piloted
bolt also simplifies installation and holds fastener plates firmly in place.
For added strength and pull-out resistance, specially formed teeth penetrate
deep into the belt carcass without damaging carcass fibers.
Market applications
- Construction and Road Equipment
- Coal
- Salt
- Potash
- Grain
- Wood Products
- Recycling
Staple Fastener System
 The
Alligator ® Ready Set ™ Staple Fastener
System is ideal for a wide variety of light and
medium-duty fastener applications.
The system features one-piece fastener strips
with pre-inserted staples that speed installation
and keep downtime to a minimum.
Quick, easy installation
Designed for belts from 1/16" (1.5 mm) to
1/4" (6.4 mm), Alligator Ready Set installation
is easy with a portable, lightweight
application tool that is easily carried to the
job for on-site installation. Simply fit the
fastener strip onto the belt end and secure
with the special installation tool, then drive
and finish set the staples for a strong, longlasting
splice.
Market applications
- Package/Parts Conveying
- Food/Sanitary Contact
- Agricultural Harvesting/Handling
- Recycling/Scrap Handling
- Wood Products
|
