login (800) 234-2358

Accesories: About Us | Contact Us | Accessories | Product Resources | Request for Quote | Request for Information   Belts » Heavy Duty Industrial Belt » Precleated General Purpose Belt Accessories Heavy Duty Industrial Belt - Made in the USA Dependable and Durable Conveyorbelt.com belts are constructed of polyester or nylon fabrics. Tough polyester filament yarns give our belts high tensile strength. The longitudinal warp yarns carry the tension, and the transverse fill yarns hold the warp in place and retain the mechanical fasteners. The crimp in the fabric acts as a shock absorber, permitting the fabric to deflect and adjust itself during impact shock. Benefits Controlled stretch provided for by Polyester's low stretch and shrink properties reduce take-up and time needed for drive adjustments Resistance to mildew and rot means that wet applications will not affect the belt Low moisture absorption ensures better dimensional stability in wet or dry applications Excellent resistance to chemicals and acids allows a wide range of uses in a variety of environments High adhesion between plies and outstanding flexibility allow the use of smaller pulleys, yielding longer service life Excellent resistance to stretch and break down due to heat means consistent service in high temperature applications Superior fastener holding ability Belts made in the USA # OF PLIES BELT TYPE BELT DESCRIPTION PIN COVERS OVERALL GUAGE (BY INCH) APPROX WGT PER INCH OF WIDTH MIN PULLY DIA (BY INCH) DATASHEET 2 HEAVY DUTY BELT Black 220 RMA Grade II HB-B-220RMAG2-B 3/16 x 1/16 3/8 0.192 10 Heavy Duty Industrial Belt - 600' or 1000' Rolls 2 ply 220 3/16 x 1/16 24" width 30" width 36" width 42" width 60" width 72" width *Freight prepaid on $10,000 (USA lower 48 Only) # OF PLIES BELT TYPE BELT DESCRIPTION PIN COVERS OVERALL GUAGE (BY INCH) APPROX WGT PER INCH OF WIDTH MIN PULLY DIA (BY INCH) DATASHEET 3 HEAVY DUTY BELT Black 330 Grade II HB-B-330G2 3/16 x 1/16 13/32 0.208 12 Heavy Duty Industrial Belt - 600' or 1000' Rolls 3 ply 330 3/16 x 1/16 24" width 30" width 36" width 42" width 48" width 60" width 72" width *Freight prepaid on $10,000 (USA lower 48 Only) # OF PLIES BELT TYPE BELT DESCRIPTION PIN COVERS OVERALL GUAGE (BY INCH) APPROX WGT PER INCH OF WIDTH MIN PULLY DIA (BY INCH) DATASHEET 3 HEAVY DUTY BELT Black 330 Grade II HB-B-330G2-B 1/4 x 1/16 15/32 0.241 12 Heavy Duty Industrial Belt - 600' or 1000' Rolls 3 ply 330 1/4 x 1/16 24" width 30" width 36" width 42" width 48" width 60" width 72" width

© 2008 ConveyorBelt.com - A Divison of R&P, Inc. Use of this site indicates acceptance of the Rubber & Plastics, Inc. Disclaimer Terms & Conditions | Warranty | Freight Terms | Fax RFQ Form