Integrally Molded Chevron Belting

SLITTABLE CLEATED BELTING

V-Cleat

Slittable cleated belts have integrally molded cleats. Patterns are designed to aggressively transfer free-flowing material. Pattern choice depends on the material being carried and the design of the conveyor. Belt is available in 2 or 3 ply, MOR (Moderately Oil Resistant) compound.

Typical applications include aggregate, fertilizer, grains, sand, bark and wood chips.

Available in slabs or cut pieces.

Chevron Conveyor Belting Type CC-15

Open chevron design allows water to escape. The 5/8" high cleat is aggressive for small pulleys on road scalpers. Can be used on primary or secondary conveyors.

Type CC-15N
A (Belt Width)	B (Cleated Width)	C (Pitch)
36" (900mm)	15"(385mm)	10"(250mm)
18" (450mm)	15" (385mm)	10" (250mm)
20" (500mm)	15" (385mm)	10" (250mm)
24" (600mm)	15" (385mm)	10" (250mm)
30" (750mm)	15" (385mm)	10"(250mm)
Type CC-15W
A (Belt Width)	B (Cleated Width)	C (Pitch)
36" (900mm)	30" (750mm)	10" (250mm)
40" (1000mm)	30" (750mm)	10" (250mm)
42" (1050mm)	30" (750mm)	10" (250mm)
48" (1200mm)	30" (750mm)	10"(250mm)

Chevron Conveyor Belting Type CC-6

Applications: Carrying coal and mineral ore, also powdery materials such as sand, fine coal, grain, and bagged materials.

Features:
• We can supply different types or widths to those given ranging from 18" (457mm) to 48" (1219mm)

Chevron Conveyor Belting Type CC-12

Applications: Carrying coal and mineral ore, also powdery materials such as sand, fine coal, grain, and bagged materials.

A (Belt Width)	B (Cleated Width)	C (Pitch)
30" (750mm)	30" (750mm)	13" (330mm)
36" (900mm)	32" (800mm)	13" (330mm)
42" (1050mm)	32" (800mm)	13" (330mm)
48" (1200mm)	32" (800mm)	13" (330mm)

Features:

• Can carry loose materials at angles of 17°-18°, and bagged materials at 30°-35°
• Cleat angle and pitch are designed for smooth travel over return idlers.
• Cleats and top cover rubber are integrally molded.
• Smooth transition, closed chevron pattern.